Continuous Fiberglass UD Tapes Manufacturer

Fiber-reinforced thermoplastic unidirectional prepreg tapes (referred to as UD tapes). It is a composite of unidirectional fibers parallel to each other and molten thermoplastic resin (PE, PP, PA, etc.) after impregnation. It is lightweight and impacts resistant Excellent characteristics.

Thermoplastic unidirectional tape construction diagram
TOPOLO UD Prepreg Tapes

Features of Thermoplastic Unidirectional Fiberglass Prepreg Tapes

  • Short fiber reinforced thermoplastic material: fiber length <1MM.
  • Long fiber reinforced thermoplastic material: fiber length 1 ~ 25MM.
  • Continuous Fiber Reinforced Thermoplastics: Length consistent with final product dimensions
Fiber Reinforcement Difference

Thermoplastic UD Tapes Processing

Thermoplastic UD tapes production process

The melt impregnation method is currently the most widely used and industrialized method for manufacturing unidirectional belts. The process of the melt impregnation method is that the continuous fibers are fully impregnated with the molten thermoplastic resin through the process of yarn laying and yarn spreading, and through the impregnation mechanism.

Application

Prepreg unidirectional tapes are widely used in shoes, rowing oars, bicycles, sports tools, honeycomb skin, truck fairing, truck skirts, RTP pipes(HDPE), auto spare parts, etc.

Lightweight Solution Expert – TOPOLO

Continuous Fiberglass Reinforced Thermoplastic Prepreg Tape Manufacturer in China

The performance of continuous fiber-reinforced thermoplastic composites is very excellent. The longer the fiber length, the better the mechanical properties. Its specific strength can be more than 10 times that of ordinary steel. The higher the specific strength, the lighter the material used to achieve the corresponding strength. , so the continuous fiber-reinforced thermoplastic composite material can realize the real sense of replacing steel with plastic and lightweight applications.

White ud tapes
Black ud tapes

Our Advantage

  • Good fiber dispersion: The glass fiber is dispersed individually in the resin, which overcomes the problem of thermoplastic fiber dispersion.
  • Customized production: using melting process to meet different special performance requirements.
  • Mass production: In mass production, the production cost is relatively low, and the quality is stable and reliable.
Thermoplastic unidirectional tapes production line

Specification

Base ResinPolypropylene(PP); Polyethylene(PE); Polyamide(PA)
Tensile Strength700~900MPa
Density1.40~1.60g/cm3
Thickness0.20~0.35mm
WidthMax 640mm
Glass Fiber Content55~65%
ColorNatural, Black
Other PropertiesFlame retardant, anti-UV, etc.