CFRT unidirectional tape is made of CFRT material, suitable for continuous manufacturing of pipes, out layers, surface decorations widely used in various fields.

In TOPOLO, the CFRT (continuous fiber reinforced thermoplastic) composites adopt thermoplastic prepregs, more convenient and less cost. The continuous fiber in CFRT PPS UD tape is impregnated with PPS (polyphenylene sulfite) and laminated together to form one ply of fiber reinforced by thermoplastic composites. It’s tensile strength and flexural strength are higher than PP UD tapes.

The fiber species used in PPS UD tapes can be set as both glass fiber and carbon fiber. The width can be customized from 500mm to 1200mm.

In TOPOLO, the CFRT PPS UD tapes can be added with optional materials like graphite, to meet the demand of UV resistance and ageing resistance.

Traditional Prepregs VS Thermoplastic PrepregsAdvantages

Easy to use for continuous engineering and processing;

Higher strength and modulus (than long fiber and short fiber reinforced thermoplastic composites);

Excellent compact resistance;

Chemical resistance and no VOC;

Environmental friendly, repairable and recyclable.

 

Parameters

CFRT PPS UD Tape

Properties1 Test Standards Condition Units Typical Value
Fiberglass Content / 23℃ Wt% 48
Density / 23℃ g/cm3 1.75
Tape Thickness / 23℃ mm 0.35
Tensile Strength ISO527 5mm/min MPa 550
Tensile Modulus ISO527 1mm/min GPa 26
Flexural Strength ISO14125 2mm/min MPa 550
Flexural Modulus ISO14125 2mm/min GPa 26

Note1: Colored product performance may be different from the above values.

Note2: Typical values are the average laboratory data, when used only for reference , not as a products standard.

Note2: Above conditions only reference, according to different equipment, different molds and product requirements, process must be appropriately adjusted.

 

CFRT PPS UD Tape with Carbon Black

Properties1 Test Standards Condition Units Typical Value
Fiberglass Content / 23 %wt 48
Density / 23 g/cm3 1.75
Tape Thickness / 23 mm 0.35
Tensile Strength ISO527 5mm/min MPa 550
Tensile Modulus ISO527 1mm/min GPa 23-24
Flexural Strength ISO14125 2mm/min MPa 550
Flexural Modulus ISO14125 2mm/min GPa 23-24

Note1: Colored product performance may be different from the above values.

Note2: Typical values are the average laboratory data, when used only for reference , not as a products standard.

Note3: Above conditions only reference, according to different equipment, different molds and product requirements, process must be appropriately adjusted.